CPM-700 Counter-Surveillance Probe

CPM-700 DETECTION FUNCTIONS

The CPM-700 With The RF Probe And Low Leakage Headphones

The CPM-700 is a broadband receiver designed to detect and locate all major types of electronic surveillance devices including room, phone, body bugs, video transmitters, and tape recorders. The CPM-700 is very effective for rapidly detecting and locating transmitting signals.

RF SWEEPING
RF sweeping is done quickly, easily and silently with the CPM-700 by attaching the RF probe. The RF probe provides rapid and silent spectrum coverage from 200Hz to over 3GHz with no holes or gaps. Due to superior sensitivity, the CPM-700 can locate even a low powered bug down to 1 microwatt. The sweep range and sensitivity in R.F. mode will also detect video transmitters. Also due to it's high sensitivity, The CPM-700 will detect snuggled bugs as well as burst transmission bugs while transmitting.

PHONE LINE R.F. SWEEP
We will check phones and phone lines in the R.F. sweep mode function, much like an induction coil with the R.F. probe.

TELEPHONE LINE TESTING
With the Modular Telephone Line Testing Jack and the Line Probe, all wire pairs will be checked on a telephone system to determine if it's clear of eavesdropping. The unit will work on both single line and multi-line telephones. NOTE: Even a single line telephone system has four wires of which only two are actually used. With the Modular Telephone Line Testing Jack, we can check ALL wire pairs for possible audio bugging on BOTH single and mult-line phones.

HOOK-SWITCH BYPASS TESTING
With the included adapters, we will conduct a hook-switch bypass test (the modification to the telephone itself that turns the headset microphone into a bug) and other telephone equipment testing.

ELECTRICAL OUTLET CARRIER CURRENT TESTING
We will silently test all electrical outlet for carrier current eavesdropping.

ELECTRONIC DEVICES
We can test anything that plugs into an electrical outlet for eavesdropping devices.

IR (INFRARED) TESTING
IR is an invisible light source and a common way in which audio can be carried from any premises. With the IR probe, we will detect IR beams carrying audio.

VIDEO CAMERA DETECTION
With the magnetic leakage probe, we will detect and locate hidden video cameras.

RECORDER DETECTION
Utilizing the magnetic leakage probe, we will also detect and locate hidden tape recorders that are running.

UNKNOWN WIRE TESTING
The source of unknown wires found in a physical inspection can be problematic. Using the CPM-700’s auxiliary input plug and patch cords, we will silently check any wire we find for audio.

OUTSIDE LASER BEAM DETECTION
Using the IR Probe, we will go around the outside of the building to detect any lasers that may be pointed at the windows of the building.

ACOUSTIC LEAKAGE DETECTION
It is quite common for eavesdropping to occur without the aid of any electronic devises at all and it often due to the acoustic characteristics of the building. The Acoustic Leakage Probe can be used to check walls, vents and pipes that could create possible acoustic leakage problems. Once detected, additional countermeasures procedures can be recommended in the form of acoustic noise generators injected in a strategic manner.

VEHICLE TRACKING DEVICES
The CPM-700 will detect and locate R.F. tracking transmitters used to follow vehicles. The typical "bumper beeper" or “bird dog” device will employ a minimum output of 100 milliwatts to more than 5 watts, and usually has a pulsed output.

COMPUTER TEMPEST COMPARISON
The CPM-700 can be used to compare emissions from Tempest Approved Equipment.

AUTOMATIC MONITOR MODE
The CPM-700 can be placed on automatic monitor mode once a sweep has been conducted. Once placed in a room and armed, the CPM-700 will detect any changes (i,.e. the installation of an audio transmitter, someone entering the room, etc..)

UV MARKING PEN AND UV INSPECTION LIGHT
Utilizing a professional UV marking pen and UV detection light, we mark the position of screw heads on electric outlets, light switches, telephones, lamps and other objects we take apart for inspection. During future inspections, the UV light will show if the object has been opened again or tampered with.









*